StoreTender Online  Version 8  ©2015,  Aloha Data Systems, Inc.

Verifone Credit Authorization Terminal Setup and Program Load

 

Applies to Verifone Models Mx830, Mx850, Mx860 and Mx870

 

 

          Steps to work with StoreTender Online

 

Step 1

Copy the following two files from the StoreTender Online download area and place into the root directory of a USB thumb drive.

 

Fa220u_090214.tgz

StoreTenderMx800_files.tgz

 

Note: If your customer would like to display an image while the unit is idle, add the file to the thumb drive now. The image must be saved as a JPG file and be named StoreLogo.jpg. The Verifone screen resolution is 320 by 240.

 

Step 2

Insert the thumb drive into the Verifone connector marked USB 

 

Step 3

Insert a paper clip into the rear of the device and hold until the blue lights change from 3 to 2

(A critical error message will appear on the screen after a few seconds. After another ten seconds this screen will disappear and a password screen will appear.

 

Step 4

Always select Usr1. The system will then ask for a password.

Enter 166831 or 166832 on the keypad and then press the ENTER key (green)

Note: 166831 and 166832 are the default Verifone passwords. Your terminal may require a different password. If the User (Usr1) has an expired password, create and verify a new password.

 

A menu will appear with the following options:

 

Information

Configure

Diagnostics

File Transfer

File Manager

Security

 

Step 5

Click on the File Transfer Icon

A menu will appear with the following options:

 

Download

ECR Download

FTP Download

USB Storage

 

Step 6

Click on the USB Storage icon

A directory of the two files you placed into the root directory of the thumb drive will appear

 

Step 7

 Click on the file marked Fa220u_090214.tgz

 Click on the INSTALL icon

 Click on the FULL icon (the load will take about 60 seconds)

 

A message will appear stating the application install is complete

Click the BACK button (yellow) once.

 

Step 8

Click on the USB Storage icon

A directory of the two files you placed on the thumb drive will appear

 

Step 9

 Click on the file marked StoreTenderMx800_files.tgz 

 Click on the INSTALL icon

 Click on the PARTIAL icon (the load will take about 20 seconds)

 

A message will appear stating the application install is complete

Click the BACK button (yellow) twice. 

 

A menu will appear with the following options:

 

Information

Configure

Diagnostics

File Transfer

File Manager

Security

 

Step 10

Click on the File Manager Icon

A menu will appear with the following options:

 

Run Application

Restart

Explore Files

Switch User

Defragment

 

Step 11 (Optional)

If you have loaded an image files from step 1 they need to be copied now. To copy these files select Explore Files. Click on the button that displays USB Drive. Click on the image file and then click Copy to Usr1. Repeat this step for each image file you are loading into the Verifone. Click the BACK button (yellow) once. The menu displayed in step 10 will appear.

 

Step 12

Click on the Run Application icon

A message will appear stating the application is starting. After the program starts (about 10 seconds) you will see the System Information screen.

(This screen will remain on until the StoreTender Online application is started for the first time.)

 

Step 13

Start StoreTender Online. Navigate to Setup/Register/Payment Terminal.

Set up the device as follows:

 

Manufacturer: Verifone

Model: Select from list

Com Port: Any valid com port (select from list)

Emulation: Verifone Form Agent 

Interface: Serial (RS232) 

Baud Rate: 115200

Parity: None

Data Bits: 8

Stop Bits: 1

 

Press the Test key and complete the settings as applicable for your business.