StoreTender Online  Version 8  ©2015,  Aloha Data Systems, Inc.

Pennsylvania Scale Programming

 

Steps to work with StoreTender Online

 

Remove any weight from the scale before starting.

 

1. Press and hold down the [PRINT] key until the scale alternately displays “Prt 25” and “Stable

2. Press the [PRINT] key until the scale alternately displays “Ech” and “65

3. Press the [ZERO] key until the scale displays “no Ech

4. Press the [PRINT] key until the scale alternately displays “PSL 81

5. Press the [ZERO] key until the scale displays “5

6. Press the [UNIT] key once to display “50

7. Press the [ZERO] key until the display reads “52

8. Press the [PRINT] key until the scale displays “PSL 82

9. Press the [ZERO] key until the scale displays “6

10. Press the [UNIT] key once to display “60

11. Press the [PRINT] key until the scale displays “PSL 83

12. Press the [ZERO] key until the scale displays “2

13. Press the [UNIT] key once to display “20

14. Press the [PRINT] key until the scale displays “PSL 84

15. Press the [ZERO] key until the scale displays “6

16. Press the [UNIT] key once to display “60

17. Press the [ZERO] key until the scale displays “65

18. Press the [PRINT] key until the scale displays “PSL 85

19. Press the [ZERO] key until the scale displays “9

20. Press the [UNIT] key once to display “90

21. Press the [ZERO] key until the scale displays “99

22. Press the [PRINT] key until the scale displays “CAL 0

23. Press the [ZERO] key once

24. Press the [UNIT] key once

25. Press the [PRINT] key once. The scale will display “Save?

26. Press the [ZERO] key until the scale displays “Yes

27. Press the [PRINT] key.

 

The scale should display 0.00 lb

A 9 pin male to female NULL modem cable is required. A standard serial cable WILL NOT work!

NOTE: Steps 25-27 are ignored if no data was changed.

 

StoreTender is expecting the scale to be set to 9600,n,8,1 (factory default)

 

StoreTender will NOT work properly if the above steps are not followed exactly!